Intended Use; Installation - Scheppach BID60-20Li Original Bedienungsanleitung

met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the „safety in-
structions" and the „Proper use" are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommend-
ed in this manual.. This ensures that your machine
performs optimally.
• Hands may never enter the processing zone when
the machine is in operation.

9. Intended use

The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufactur-
er will be liable for any damage or injuries of any kind
caused as a result of this.
To use the equipment properly you must also observe
the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have
to be acquainted with this manual and must be in-
formed about the equipment's potential hazards.
It is also imperative to observe the accident preven-
tion regulations in force in your area.
The same applies for the general rules of health and
safety at work.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes.
The machine may be used only with original acces-
sories and original tools of the manufacturer.
The safety-, workplace- and maintenance specifica-
tions of the manufacturer as well as the dimensions
specified in the technical data must be observed.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

10. Installation

m IMPORTANT!
You must fully assemble the appliance before
using it for the first time!
Charging the battery pack
DANGER OF ELECTRIC SHOCK! Before cleaning
or servicing the charging station or the battery pack
always ensure that the plug is not in the mains sock-
et.
22 | GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
All manuals and user guides at all-guides.com
Note! A new battery pack, or one that has not been in
use for an extended period, must be charged
up before the first / renewed usage. The battery pack
attains its full capacity after ca. 3–5 charging cycles.
CAUTION! Always ensure the plug is removed from
the mains socket before inserting a battery pack
into, or removing one from, the charging station. Nev-
er charge the battery pack if the ambient tempera-
ture is less than 10 °C or greater than 40 °C.
1. Insert the battery pack 6 into the quickcharger 15
(see Fig. C).
2. Insert the power plug into the socket. The flashing
red charge indicator LED 16 shows that charging is
in progress. The red charging control LED 16 extin-
guishes as soon as the battery pack is fully charged.
The green charging control LED 17 signals to you
that the charging process is complete and
the battery pack 6 is ready for service. Never charge
the battery pack for a second time immediately af-
ter a fast charging process has been completed.
This can give rise to the battery pack becoming over-
charged and to a reduced service life of the battery
and charging station.
Switch the charger off for at least 15 minutes be-
tween two successive charging procedures.
Remove the power plug from the wall socket.
Insertion / removal of a batterypack into the appli-
ance
Ensure that the appliance is switched off before in-
serting the battery. The insertion of a battery into an
electrical appliance that is switched on can lead to
accidents.
Inserting the rechargeable battery pack:
Move the rotation switch 2 into the middle position
(lock) and push the rechargeable battery pack 6 into
the handle until it engages.
Removing the rechargeable battery pack:
Press the release button 7 and remove the recharge-
able battery pack
Changing tools
Your cordless electric drill / screwdriver has a fully
automatic spindle lock and is fitted with an
enclosed keyless chuck incorporating the latest tech-
nology .
Once the motor has come to a halt, the drive shaft is
automatically locked, so that the chuck 13 can
be opened simply by turning it . After you have in-
serted the required bit and fixed it in place by turning
the chuck , you can immediately continue working.