Herunterladen Inhalt Inhalt Diese Seite drucken

LD Systems AMP 106 T Bedienungsanleitung Seite 6

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
DANGER:
1. Choking hazard! Plastic bags and small parts must be kept out of reach of persons
(including children) with reduced physical, sensory or mental capabilities.
2. Danger of falling down! Make sure that the device is securely installed and cannot
fall down. Only use suitable stands or mountings (especially for fixed installations).
Make sure that accessories are properly installed and secured. Make sure that
applicable safety regulations are observed.
WARNING:
1. Use the device only in the manner intended.
2. Operate the device only with the accessories recommended and intended by the
manufacturer.
3. During installation, observe the safety regulations applicable in your country.
4. After connecting the device, check all cable routes to prevent damage or accidents,
e.g. due to tripping hazards.
5. It is essential to observe the specified minimum distance to normally flammable
materials! If this is not explicitly stated, the minimum distance is 0.3 m.
CAUTION:
1. In the case of moving components such as mounting brackets or other moving
components, there is a possibility of jamming.
2. In the case of units with motor-driven components, there is a risk of injury from the
movement of the unit. Sudden device movement can cause shockreactions.
CAUTION:
1. Do not install or operate the unit near any radiators, heat registers, stoves, or other
sources of heat. Always ensure that the device is installed in such a way that it is
sufficiently cooled and cannot overheat.
2. Do not place ignition sources such as lighted candles near the unit.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shocks or impacts to the device.
6. Observe the IP protection class as well as the ambient conditions such as
temperature and humidity according to the specification.
7. Devices may be subject to continuous development. In case of deviating
information on operating conditions, performance or other device characteristics
between operating instructions and device labeling, the information on the device
always has priority.
8. The device is not suitable for tropical climates and for operation above 2000 m
above sea level.
9. Unless explicitly stated, the device is not suitable for operation under marine conditions.
6

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ldamp106t

Inhaltsverzeichnis