Masking Tape; Shutting Down/Dismantling; Disposal And Returns - RK Rose+Krieger quad EV Montageanleitung

7. Working life

7.4.2 Masking tape

Take care when working with masking tape as there is a risk of cutting yourself.
Only undamaged masking tape can be installed. You must exchange the masking tape if it is buc-
kled, cracked or kinked. The masking tape for your linear unit is defined by its length on your li-
near unit. Perfect functioning can only be guaranteed if the length of the masking tape is ideal.

7.5 Shutting down/dismantling

Before starting any work on the linear unit, any electrical drives used are to be pro-
tected against accidental switching on.
If a linear unit is installed in an oblique or vertical position, the guidance slide drive must be se-
cured against slipping during dismantling. The system is to be freed from any loads or forces.
Following a collision, the tapped spindle, guide nut, the slideway and the guide carriage have to
be replaced - even if there is no visible damage. Spare parts information is to be taken from the
spare parts list for the relevant linear unit type.

7.6 Disposal and returns

The linear unit must either be disposed of in an environmentally friendly way according to the ap-
plicable policies and regulations, or returned to the manufacturer.
The manufacturer reserves the right to charge for disposing of this linear unit.
52