Touchscreen Controls - Jabra GO 6470 Kurzanleitung

4. Run the Jabra Control Center — click on the
Windows Start button and select All Programs >
Jabra > Jabra PC Suite > Jabra Control Center.
5. Select the Softphone tab for your Jabra GO device.
6. In target softphone for outgoing calls, select
either microsoft office Communicator or
Softphones supported by Jabra pC Suite.
Configure other parameters, as required.
This establishes the default softphone target type.
Use the online help available in this window to
learn more.
Step 7: Connect to your mobile phone
The setup wizard asks whether you want to connect
to a mobile phone and guides you through the
procedure:
1. You must ensure that Bluetooth is active on your
phone and then put it in pairing mode.
Your phone looks to see if any nearby Bluetooth
devices are advertising themselves for pairing.
2. Use your phone's controls to identify and select the
"Jabra GO 6400" device. Your phone might also ask
for the headset's pass code. The pass code for all
Jabra devices is 0000 (four zeros).
Your phone tries to pair with and connect to the
base.

TOUCHSCREEN CONTROLS

During normal operation, the touchscreen displays
information about your headset, shows the current
target phone for outgoing calls and indicates its
status. From here, you can answer an incoming call,
end the current call, access your base settings, choose
a target phone and open an audio link to the current
target phone.
US
5
Touchscreen controls for standard, everyday operation
1 Settings icon: touch here to go to the settings
menu for your base and headset.
2 battery indicator: indicates the current charge
level of your headset.
3 Current target phone: shows the current target
phone and indicates its status (ringing, online, etc.).
This is the phone to which you will connect if you
tap the headset multifunction button or touch the
activate-audio-link icon.
4 other phones: touch the appropriate icon here
to change the current target phone—or press the
headset multifunction button when no call is active
to cycle through available phones (press and hold
for about two seconds).
5 Activate audio link: touch here to answer an
incoming call or activate the audio link to the current
target phone—or tap the headset multifunction
button when no call is active.
Please see the user manual for complete details.
1
2
4
3