Before Using For The First Time; Transport Inspection; Preparations; Additional Safety Measures For Certain Operations - BDS Maschinen MAB 455 Originalbetriebsanleitung

Before using for the first time

Transport inspection

Preparations

Additional safety measures for certain operations

Non-horizontal working position
MAB 455
The machine is supplied as standard with the components indi-
cated in chapter Components/scope of supply.
NOTE
► Inspect the delivery for completeness and obvious signs of
damage. Report an incomplete or damaged delivery to your
supplier/dealer immediately.
This chapter contains important instructions for the necessary
preparations before starting work.
Additional safety precautions must be taken for the following
operations with the machine:
WARNING
Risk of injury from the falling machine.
When working in inclined or vertical position and during over-
head work, the machine must be secured to prevent it from
falling using the safety chain (D) supplied.
► Check the safety chain for proper function before every use.
A damaged safety chain must not be used. Replace a dam-
aged safety chain immediately.
► Attach the safety chain in such a way that the machine
moves away from the operator in the event of slipping.
► Lay the safety chain as tightly as possible around the handle
of the machine.
► Check the secure fitting of the safety chain and lock before
starting work.
► Use the protective equipment stipulated in chapter
protective equipment.
Before using for the first time
Personal
43