Telescopic Rails - Sharp K-71V28AM2-EU Bedienungsanleitung

it to the back.
Deep Tray
Deep tray is used to cook stews.To lo-
cate the tray correctly in the cavity, put it
to any rack and push it to the back.
Removal of wire shelf
Pull the wire shelf as shown in the pictu-
re. After releasing it from clips, lift it up.
a

Telescopic rails

Remove G screws on the each catalitic
enamel coated panel.
Wire Rack with Easyfix Full Extension
Telescopic Rail
The telescopic rail extends out fully to allow
easy access to your food.
Telescopic rails
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
Fastener
• Positioning of the telescopic rails on the
wire rack is secured with the fastening
tabs on the fasteners.
• Remove the side runner. See section
"Removal of the wire shelf".
• On each telescopic rail there are top
and bottom fasteners that allows you to
reposition the rails.
• Hang the telescopic rail top fasteners
on the side rack level reference wire
and simultaneously press the bottom
fasteners until you clearly hear the
fasteners clip into the side rack level
fixing wire.
• In order to remove, hold the front
surface of the rail and follow the
previous instructions in reverse.
EN - 17
Fastening tab