Replacing The Projection Lens - Sony VPL-FHZ80 Installationsanleitung

Replacing the Projection Lens

Notes
 Avoid removing/attaching the lens with the projector
installed suspended from a ceiling.
 For usable projection lenses, see "Optional accessories"
in the Help Guide.
 Do not attach any lens other than the specified accessory
lens sold separately.
 Be careful not to drop the projection lens.
 Avoid touching the lens surface.
Removing
1
Return the projection lens to the center
position.
While the unit is turned on, press the LENS
SHIFT key on the Remote Commander, then
press the RESET key on it. The projection lens
returns to the center position.
Note
The projection lens cannot be removed unless it has
returned to the center position.
2
Turn off the projector, then unplug the AC
power cord from the wall outlet.
Caution
When replacing the lens, your eyes may be
damaged if a strong light accidently gets into your
eyes. Before replacing the lens, turn off the
projector and then unplug the AC power cord.
3
While pressing and holding down the LENS
RELEASE button, rotate the projection lens
counterclockwise to pull out the lens straight.
LENS RELEASE button
Projection lens
Attaching
1
Fully insert the projection lens with the index
on the lens facing toward the top surface of
the main unit.
Top of surface of the main unit
2
Rotate the lens clockwise until it clicks.
Note
When attaching the projection lens, do not press the LENS
RELEASE button.
Index
Replacing the Projection Lens
45
GB