Connections And Functions; Power Supply; Installation; Call Factory Default Settings (Reset) - Abus IPCB34511A Installationsanleitung

3. Connections and functions

3.1 Power supply

ATTENTION!
Before you begin the installation, make sure that the supply voltage and the nominal
voltage of the camera match.

3.2 Installation

For installation notes please refer to the quick guide in the delivered product package.

3.3 Call factory default settings (Reset)

1. Please disconnect the camera form power
connection.
2. Press the "Reset" button on the camera and
keep it pressed.
3. Now connect the power supply to the camera
(2-pin power supply or Power over Ethernet),
and hold the "Reset" button pressed for
another 30 seconds.

3.4 SD card slot

To install the Micro SD card the cover and the dome bubble need to be removed first. The Micro-
SD card slot is located on the back of the camera.
Max. SD card size:
Before usage of micro SD card the card must be formatted.
128 GByte
12 VDC, round plug, 5,5 x 2,1 mm
Reset
16
Micro SD
Card