SICK WI130 Bedienungsanleitung Seite 38

OPERATING INSTRUCTIONS
3.3 End piece
4 Mounting
4.1 Mounting and removing the evaluation unit
en
38 O P E R A T I N G I N S T R U C T I O N S | Evaluation unit WI130
NOTE
When locked, no commands such as teach-in/copy from other sensor heads are
accepted.
Table 2: End piece
NOTICE
Installation in the following environments may lead to malfunctions:
• Dusty or steamy environment
• Locations with corrosive gases
• Locations with spraying water or oil
• Locations with heavy movements of the subsurface
Mounting
Mounting on the mounting rail
1. Hook the sensor head into the mounting rail.
2. Press to lock.
1
Figure 2: Mounting
Removal
Removing from the mounting rail
1.
Press the evaluation unit in the 1 direction.
2. Remove the sensor head. Remove the unit.
BEF-BE01-W190 (2 parts)
2
8020148.1HRJ/2023-02-08 | SICK
Subject to change without notice