Epson TM-L90P Bedienungsanleitung Seite 7

Installing the Paper Roll
When you use the printer horizontally, peel off the backing sheet of the
paper exit guide and attach it as shown below to prevent cut paper
from falling inside the printer after paper is cut by the autocutter.
Note:
If you use roll paper with a
core that is smaller than the
specifications (inside
diameter of at least 25.4 mm
and outside diameter of at
least 31.4 mm), be sure not
to attach the paper exit
guide. Otherwise a paper
jam might occur.
Be sure to use paper rolls that meet the specifications.
1. Open the paper roll cover, using the cover open lever.
2. Insert a paper roll and pull out a small amount of paper, aligning
the paper with the guide, as shown below.
3. Close the paper roll cover; then
tear off the roll paper.
Note:
Be sure to close the cover completely by
pushing down on the middle of the
cover.
All manuals and user guides at all-guides.com
English
TM-L90 User's Manual 5
paper
exit
guide