Storage When Not In Operation; Transport; Waste Disposal And Environmental Protection; Replacement Parts/Accessories - Parkside PBKS 53 B3 Originalbetriebsanleitung

GB
Storage when not in
operation
Failure to follow the storage instruc-
tions may leave fuel remnants in the
carburettor, which in turn can cause start-
up problems or permanent damage.
For operational breaks of more
than three months:
1. Drain the fuel tank in a well-ventilated
place.
2. Start the engine, allowing it to idle until
the engine stops and the carburettor is
free of fuel.
3. Let the engine cool off (about 5 minu-
tes).

Transport

• Use the blade bar's protective cover
(16) when transporting the device.
• Carry the device by the front handle
with the blade bar pointing backwards.
Waste disposal and
environmental protection
Do not allow used oil and petrol residues
into the sewer system or drains.
Dispose of used oil and petrol residues
in an environmentally friendly way – take
them to a disposal point.
Take the equipment, accessories and
packaging for environmentally friendly
recycling. Machinery does not belong in
domestic waste.
Drain the petrol tank carefully and take your
equipment to a recycling point.
Machines do not belong with do-
mestic waste.
56
Directive 2012/19/EU on waste electrical
and electronic equipment: Used electrical
devices must be collected separately for
disposal and recycled in an environmen-
tally sound manner.
Depending on the implementation in natio-
nal law, you may have the following options:
• Return to a shop,
• Hand over to an official collection point,
• Return to the manufacturer/distributor.
We will dispose of any defective devices
that you send to us free of charge.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Replacement parts/
Accessories
Spare parts and accessories can
be obtained at
www.grizzlytools.shop
If you have issues ordering, please use the
contact form. If you have any other ques-
tions, contact the "Service-Center" (see
page 59).
Oil filler cap ......................... 91110127
Saw chain ............................ 91110132
Chain bar ............................ 91110131
Spark plug ........................... 91110128
Bio chain oil 1 liter ................ 30230001
Safe use of the petrol chainsaw is
only possible with approved saw
chains and guide bars. The use of unap-
proved combinations can cause serious or
even fatal injuries. Please use only the fol-
lowing guide bars with this petrol chain-
saw:
BE18-72-5810P (Hangzhou kangxin tools
manufacturing Co., Ltd)