Maintenance Intervals; Maintenance Interval Table - Parkside PKS 1600 B2 Originalbetriebsanleitung

• Clean the saw chain after every use. Use
a paint brush or wipe for that. Do not use
any liquids to clean the chain. After clean-
ing, oil the chain lightly with chain oil.
• When cleaning, also remove the chain
wheel cover (8) so that this area can be
cleaned as well.
• Clean the chain bar (Guide) (4).
• Clean the ventilation slots and the sur-
faces of the machine with a paint brush,
whisk or dry cloth. Do not use any liq-
uids for cleaning.
• Clean the oil passages of the chain bar
( 27), in order to guarantee a
trouble-free, automatic oiling of the saw
chain during operation.

Maintenance Interval Table

Machine part
Components of the chain brake Check, replace if required
Sprocket ( 21)
A
Saw chain (5)
Saw chain (5)
Chain bar (4)
Chain bar (4)
Oil automatic system

Maintenance intervals

Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Action
Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
Turn around
Check and, where appropriate,
clean­oil­outflow­duct
Before After 10
every hours of
use operation






GB
After
every
use


47