Philips HF8440 Bedienungsanleitung Seite 10

EnglisH
10
The actual operating time may vary over time,
depending on the selected vibration mode and
speed.
Charge the massagers when the light ring
starts flashing slowly to indicate that the battery is
almost empty.
1 Make sure that all parts (massagers and
charging case) are dry.
2 Insert the small plug into the charging case and
put the adapter in the wall socket.
3 Open the lid of the charging case.
4 Place the massagers in the charging case.
- The female massager only fits properly in the
charging case with the buttons facing up.
- The male massager only fits properly in the
charging case with the buttons facing down.
The massagers switch off automatically when you
place them in the charging case and close the lid.
Note: The charging case does not work when the
massagers are placed incorrectly or when the lid is
open.
Note: You can also charge one massager at a time.
5 Close the lid of the charging case.
Note: The charging case does not work if the lid is open.
, The charging light on the charging case
starts flashing to indicate that the massagers are
being charged.
Note: When you charge the massagers for the first
time or after a long period of disuse, it may take a few
minutes before the charging light starts flashing. This is
normal.