5: Connecting The Cpf-Ix001 To The Network - Sony CPF-IX001 Bedienungsanleitung

To connect/disconnect the
network unit
Connecting
1
Turn off the power switch ?/a on the
subwoofer.
2
Connect the network unit as shown below.
Disconnecting
1
Press SUSPEND to set the network unit to
the suspended mode.
2
Turn off the power switch ?/a on the
subwoofer.
3
Disconnect the network unit as shown
below.
Note
If the network unit is disconnected without first setting
it to the suspended mode, the settings may not be
saved.
12 GB
5: Connecting the CPF-
IX001 to the network
For the network connections and settings, refer
to the "Quick Setup Guide" supplied with the
CPF-IX001.