IKEA DIRIGERA E2003 Bedienungsanleitung Seite 5

R ing light softly pulsing white
This is shown once your hub has finished starting up. You can
now follow the instructions in the app to connect your hub.
C entre light constant white
Shown when the hub is connected to the internet and
everything is OK.
Centre light double-blinking white
Shown when the hub is disconnected from the internet. You
can continue to control your devices through the app and your
home WiFi network.
R ing light – spinning white
When your hub is updating or busy processing a large
amount of information.
R ebooting your hub
Disconnect and reconnect the power to your hub to reboot it.
The ring light fills to symbolise loading while starting up. This
will not delete information on your hub.
F actory resetting
Push a pin into the pinhole on the underside of the hub until
the status lights turn off. The centre light will then blink red 4
times when the hub is ready. Note – this deletes all previous
hub information.
Adding IKEA Home smart products to your hub
Follow the instructions in the app to add "Works with IKEA Home smart"
devices to the hub.
5