Removing Deposits Within The Device; Maintenance; Storage / Transport - Parkside PKMA 20-Li A1 Originalbetriebsanleitung

4. Allow the device and all parts to fully
dry.
Do not allow water to stay in the
tank for longer than 24 hours.
Removing deposits within
the device
Limescale builds up in the internal pipes
as a result of using the device. Limescale
deposits hinder the flow of water and thus
extend the drip time. If the drip time has
increased, clean the internal pipes with
citric acid.
1. Remove the water tank (
pour in 240 ml of water.
2. Add 5 g of commercial citric acid to
the water and stir it.
3. Slide the water tank (
device.
4. Remove the filter holder/coffee pod
holder ( 8/9) from the device.
5. Place the coffee cup (
cup holder (
6. Press the on-off button (
7. Once the drip process is complete, re-
move the water tank (
cup and rinse them with water.
8. Pour in 240 ml of water into the water
tank ( 5) and slide the water tank
( 5) into the device.
9. Place the coffee cup (
cup holder (
10. Press the on-off button (
wait until the drip process is complete.
Repeat this step several times if you
taste or smell citric acid.
If necessary, repeat the steps listed above.
5) and
5) into the
10) onto the
7).
13).
5) and coffee
10) onto the
7).
13) and

Maintenance

The device is maintenance free.

Storage / transport

• Use the bow-type handle (
carrying the device. Be careful not to
trap your fingers when you close the
handle.
• To avoid fire or burns, allow the device
to cool completely before carrying or
storing it.
• The supplied measuring spoon
( 15) can be stored on the reverse
side of the water tank flap (
Slide the end of the spoon into the
hooks for storage.
• Store the device:
- in a dry location,
- out of the reach of children.
• Remove the rechargeable battery from
the device before storing the device for
a long period of time (winter storage).
GB IE
2) when
1).
23