Maintenance Works - Kärcher HDS 551 C Eco Bedienungsanleitung

Maintenance Works

Clean the sieve in the water connec-
tion
Figure 1 - Pos. 9
è Take out sieve.
è Clean in water and reinstall.
Clean sieve in the water shortage
safe guard
Figure 8
è Loosen covering nut and take off hose.
Figure 9
è Take out sieve.
Note
If necessary turn in screw M8 appr. 5 mm in-
wards and therewith pull out sieve.
è Clean sieve in water.
è Push sieve inwards.
è Put on hose.
è Tighten covering nut firmly.
Clean filter at the detergent suck
hose
Figure 10
è Take out detergent suck hose.
è Clean filter in water and reinstall.
Oil change
Figure 11
è Ready a catch bin for appr. 1 Liter oil.
è ready catch gutter.
è loosen release screw.
Kärcher Hint: Use a sliced RM 110 bottle as
a catch gutter.
è Release oil over the catch gutter into the
catch bin.
Dispose of old oil ecologically or turn in
at a gathering point.
è Tighten release screw.
è Fill oil slowly up to the MAX marking.
All manuals and user guides at all-guides.com
Note
Air pockets must be able to leak out.
For oil type refer to technical specificati-
ons.
Indicator lamp fuel shortage glows
HDS 558.../698.../798...only
Figure 2 - Pos. 2
– Fuel tank empty
è Refill.
Figure 2 - Pos. 4
– Engine overload/overheat
è Turn device switch on "0" and let engine
è If malfunction still occurs, have device
Indicator lamp liquid softener glows
HDS 558.../698.../798...only
Figure 2 - Pos. 3
– Liquid softener tank is empty, due to
è Refill.
– Electrodes in the tank are dirty
è Clean the electrodes.
HDS 558.../698.../798...only
Figure 2 - Pos. 5
– Detergent tank is empty.
è Refill.
Faults
Indicator lamp "Ready for use"
turns off
cool off for min. 5 minutes.
checked by customer service.
technical reasons a remainder stays in
the tank.
Indicator light Chemistry glows
31
English