Commissioning And Operation; Attaching The Accessories; Dry Vacuum Cleaning; Finish Operation - Kärcher KNT 2 Premium Bedienungsanleitung

Commissioning and
operation
ATTENTION
Always work with an inserted
cartridge filter during wet as well
as dry vacuum cleaning!

Attaching the Accessories

Illustration
Remove the appliance head and

take accessories out of the contain-
er.
Illustration
Fit the swivel casters on the con-

tainer bottom. Insert filter bag if re-
quired.
Illustration
Put the appliance head onto the

container and lock it.
Illustration
Connect accessories.

Note: For vacuuming dry dirt or water
off the floor - always work with the in-
sert (brush strip and rubber lip) in the
floor nozzle.
Illustration
Connect the mains plug and turn on

the appliance.

Dry vacuum cleaning

ATTENTION
Work with a dry cartridge filter
only!
To vacuum fine dust, use the filter

bag.
14 English
Information filter bag
The filling level of the filter bag de-
–
pends on the dirt that is sucked in.
The filter bag needs to be replaced
–
more frequently while sucking in
fine dust, sand, etc.
Clogged filter bags can burst -
–
therefore make sure to replace the
filter bag in a timely manner!
ATTENTION
Vacuum cold ashes only when
using a pre-filter.
Order no. basic design: 2.863-139.0,
premium design: 2.863-161.0.
Wet vacuum cleaning
Caution:
Do not use a filter bag!
Immediately switch the appliance off if
foam forms or liquids escape!
Immediately switch the appli-
ance off or pull the power plug if
foam forms or liquids escape!
Illustration
Do not use a filter bag!
Note: If the container is full, a float
closes the suction opening, and the ap-
pliance works at a higher speed.
Switch off the appliance immediately,
and empty the container.

Finish operation

Illustration
Turn off the appliance and discon-

nect the mains plug.
Empty the container
Illustration
Remove the appliance head and

empty the reservoir.