Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Mains Operation; Battery Operation; Cleaning Operations - Kärcher 1.528-Serie Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Installation of the filter bag
 Release and remove the suction head.
 Remove the main filter basket.
 Install the fleece filter bag or the paper
filter bag (option).
 Insert main filter basket.
 Insert and lock the suction head.
Insert the battery
Illustration
Note: Press the battery downwards up to
the end when you insert it in the device.
Charge the battery
Illustration
Note: Please read the operating instruc-
tions of the charger manufacturer, espe-
cially the chapters on safety instructions!
The battery is partially charged at the time
of delivery. Charge it before appliance
startup and then as and when required.
Note: The battery can be charged only
when it is removed out of the appliance.
 Insert the charger delivered with the ap-
pliance into a proper socket.
 Insert the battery in the charger.
Charging time for empty battery (per bat-
tery)
BC 4/3.0 quick charger, 4-times
(max. 4 batteries can be
charged one after the other)
Quick charger, BC 1/1.8, single
(special accessory)

Operation

Note: The appliance may only be operated
with closed battery compartment.
The appliance can be operated in 2 ways:

– Mains operation

– Battery operation

Note: If the power supply is assured for
both the operating types, the device auto-
matically switches over to mains opera-
tions.
Mains operation
Power supply through electrical connec-
tion.
 Plug in the mains plug.
12
Power supply from battery. Only one bat-
tery is required for operating the device.
Battery is empty or has not been
inserted
– Indicator lamp of the empty battery
blinks
– Appliance automatically shifts to the
charged battery mode.
Both the batteries are empty
– Both the indicator lamps blink for 30
seconds.
– Appliance switches off.
– Mains operations are possible.
Note: We recommend that you operate the
appliance in the mains mode while cleaning
textile covering because of the high clean-
ing power that is required for such jobs.
 Switch on the appliance at the main
switch.
 Set the selection switch of the floor noz-
zle to hard surface or carpet.
 Regulate the suction force on the suc-
tion force regulator (continuous).
 Perform the cleaning operation.
1:00 h
 Switch off the appliance at the main
switch.
1:45 h
 Pull out the mains plug if necessary.
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
– 3
EN
Battery operation

Cleaning operations

Turn off the appliance
After each operation

Transport

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

T 9/1 bp

Inhaltsverzeichnis