Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Regulations; Layout And Items Supplied; Proper Use - EINHELL GE-ST 36/40 Li E Originalbetriebsanleitung

Akku-schneefräse
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols used (see Fig. 13)
1. Danger! - Read the operating instructions to
reduce the risk of injury.
2. Keep your distance!
3. Keep hands and feet away from the cutter
drum!
4. Do not reach into any openings while the
machine is running! Switch off the machine
before you clean the snow ejector opening!
5. Wear safety goggles!
6. Wear safety gloves!
7. Guaranteed sound power level.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1. Handle
2. On/Off switch
3. Safety lock-off
4. Speed controller
5. Top long handle
6. Additional handle
7. Wing nut
8. Lock bolt M6
8a. Hex screw M6
9. Bottom long handle
9a. Spring ball
Anl_GE_ST_36_40_Li_E_SPK13.indb 17
Anl_GE_ST_36_40_Li_E_SPK13.indb 17
GB
10. Long handle mount
11. Motor housing
12. Battery compartment cover
13. Adjustment lever for the eject direction
14. Carry-handle
15. Ejector cover
16. Snow guide blades
17. Cutter drum
18. Skids
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Cordless snow thrower
Assembly material
Original operating instructions
Safety instructions

3. Proper use

This machine is designed solely for private use
in clearing away freshly fallen loose snow (wet
and powdery) from paved paths and areas (e.g.
courtyards, garage drives, footpaths or parking
spaces).
The paths and areas to be cleared must have a
fi rm base and a smooth surface (e.g. concrete
paving, granite paving or asphalt).
- 17 -
11.06.2021 08:39:52
11.06.2021 08:39:52

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

34.170.11

Inhaltsverzeichnis