Connection - Conrad 857907 Bedienungsanleitung

Rear-view mirror installation
The heart piece of the reversing video system is the rear-view mirror with integrated TFT screen.
Pull apart the rear clamp of the rear-view mirror and place it on the vehicle's rear-view mirror. Place the
connection lines in the vehicle roof fold.
When choosing the installation site, ensure that the display is not in the direct view area of the
driver or in any safety-relevant areas (airbags, etc.).

Connection

After installation and placement of all components, the plug connections for the display and voltage sup-
ply must be made.
The following sketch shows how all components are wired.
Create all plug connections as displayed in the connection sketch.
- Connect the black plug of the monitor cable at the mirror (11) to the black plug of the connection cable
for permanent power supply (10).
25