Pressure Feedback - Bosch Rexroth PST 6 331 Serie Anleitung

R911172805 | PST 6xxx.331 Bosch Rexroth AG 37/44
Features
7.1.9

Pressure feedback

The pressure feedback will be set from the pressure valve, if the prorgammed
value of the valve has been reached.
At the end of the pre squeeze time the control will be ask this input.
If the input is "1" then the control starts immediately with the preweld time.
If the input is "0" then the control will wait for "1".
If after 5 seconds the input still is not "1", then the control breaks the process with
an error message.