Commissioning And Operation - Klarstein VALDERAMA 10029347 Bedienungsanleitung

COMMISSIONING AND OPERATION

• Turn on the power before starting the fan.
• The fan will start as soon as you operate the 3-position switch, which is
connected to the motor via the extension chain.
• Pull the light switch extension chain to turn the light on and off.
The fan will rotate at 3 different speeds depending on how many times you pull
the extension chain:
• Pull once = high speed
• Pull twice = medium speed
• Pull three times = low speed
• Pull four times = Off
The switch on the motor housing can be used to influence the direction of the
airflow generated by the rotor blades.
• Cold weather: Set the switch to RIGHT so that the blades distribute the warm
air under the ceiling to the room below.
• Warm weather: Set the switch to LEFT so that the blades create a cooling
airflow and distribute it into the room.
Note: Make sure the blades have come to a stop before changing the direction
of the blades. To avoid damaging yourself and the motor, the switch should be
in the UP or DOWN position when the fan is running.
EN
13