Warning and Safety instructions
Installation advice
~
This lid must not be used in conjunction with the CS 1421
(Salamander) or the CS 1028G (Wok) CombiSet appliance.
~
Do not switch the appliance on when the lid is lowered as
it will pose a safety risk and will result in heat damage to the
lid.
~
Do not use the lid as a resting place for any other objects.
~
Australia and New Zealand only
Do not remove the warning labels as failure to follow the
directions given may result in personal injury and damage to
the appliance.
Only lower the lid when the appliance has cooled down
and the residual heat indicator (if applicable) has gone
out.
Screws are supplied for securing the cover. If it is not
possible to secure the cover with screws, e.g. for granite
worktops, adhesive can be used instead.
en
9