Transport And Storage - Bosch Rexroth 2GE Serie Montageanleitung

2/3/4/5GE.... | 3 608 870 E96/2016-03
5

Transport and storage

For storing and transporting the product, al-
ways observe the ambient conditions spec-
ified in the technical data of this product. In-
formation on the technical data is contained
in the corresponding section of these in-
structions.
Notes for transportation and shipping
CAUTION
Not secured Rexroth tightening
spindle during transport!
Risk of injury due to unsecured Rexroth
tightening spindles falling down!

Secure Rexroth tightening spindles
during transport.
Rexroth-tightening spindles are intended for
shipment by road, rail, plane or ship.
Rexroth-tightening spindles may be
shipped in individual packages or in multi-
packs.
Storage notes
NOTE
Damages!
Damages of the Rexroth tightening spin-
dle due to rust formation after unpacking!

Make sure that Rexroth tightening
spindles are packed in corrosion-pro-
tected packages. Rexroth tightening
spindles are protected against corro-
sion if packed in their original pack-
ing.
Bosch Rexroth AG
Transport and storage
Unpacking notes
After unpacking, Rexroth tightening spin-
dles are ready to be installed in partly com-
pleted machinery or in a machine or system.
If Rexroth-tightening spindles are not in-
stalled in partly completed machinery or in a
machine or system:

Note "Storage notes" on page 53.
How to handle packing material
The original packing of Rexroth tightening
spindles consists of recyclable material and
can be recycled.
53/70