Warning And Safety Instructions - Miele SEB 236 Gebrauchsanweisung

G

Warning and Safety instructions

This Electrobrush meets statutory
safety requirements. Inappropriate
use can, however, lead to personal
injury and damage to property.
Read the operating instructions
carefully before starting to use this
piece of equipment, to avoid the risk
of accidents and damage to the
vacuum cleaner and to the brush.
Please keep these instructions in a
safe place for reference, and pass
them on to any future users.
Correct use
The Miele Electrobrush is a motor
driven accessory for use with Miele
vacuum cleaners only. It must not be
used with vacuum cleaners produced
by other manufacturers.
The Electrobrush must only be
used for household purposes to
vacuum and brush dry floor surfaces.
Do not use on people or animals.
Any other use, modification or alteration
to the Electrobrush is at the owner's risk
and could be dangerous.
The manufacturer cannot be held liable
for damage resulting from improper or
incorrect use of the appliance.
8
Technical safety
Before using the Electrobrush for
the first time, ensure that the
connection data on the data plate
(voltage and frequency) match the
mains electricity supply. It is essential
that they match to avoid damage to the
appliance.
Do not use the Electrobrush,
electro-suction hose or
electro-telescopic tube if they show any
sign of damage. Damaged components
could be dangerous.
Always disconnect the vacuum
cleaner from the mains supply
when you have finished using it, as well
as for maintenance work and cleaning.
Switch off at the wall socket and
remove the plug. Pull on the plug and
not the cable.
Do not let the appliance get wet.
Clean only with a dry cloth or
slightly damp cloth when disconnected
from the mains supply. If moisture gets
into the appliance there is the risk of an
electric shock.
The electro-suction hose and the
electro-telescopic tube contain
electrical wires. The plug connectors
must not come in contact with water. Do
not attempt to clean them with a damp
cloth. Danger of electric shock.
Repairs should only be carried out
by a suitably qualified and
competent person in accordance with
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.