User Equalizer Setting - JVC CO-46LCD-BD Bedienhandbuch

User equalizer setting

24
Downloaded from www.Manualslib.com manuals search engine
Volume HP/Line Out
Since the output Line Out is connected in parallel with
the headphone, the volume is changed for the analo
Subwoofer volume
If you connect an active subwoofer without volume
control, you can regulate the volume for the Subwoofer
here.
Max Startup Volume
Volume when the set is switched on.
S
Select the desired volume level
[ ] / [ ].
A "
AVC (Automatic Volume Control)
This function ensures an uniform volume when you
switch over from one TV channel to another.
SPDIF input (input for digital audio signals)
You can connect the digital audio input with a picture
signal from an AV or PC source here.
User Equalizer
For an individual tone setting with the aid of the
equalizer. See User equalizer setting.
S
To perform settings in the menu <User Equalizer>,
you must select the User setting in the menu option
<Equalizer> and after selection of the menu option
<User Equalizer> activate the menu with the button
[ ].
"
You can adapt the level for the individual frequencies
to suit your personal requirements here.
S Select the desired frequency with the button [
[ ].
B
S
Press the button [ ] to raise the selected
"
frequency.
S Press the button [ ] to weaken the selected
"
frequency.
S
To close the menu press the red button.
] or
Y
ENGLISH