Troubleshooting - AEG MC 4448 DVD Bedienungsanleitung

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault Fault Possible cause
The power supply No power supply
light does not light
no power supply/mains switch
switched off
No image displayed Video cable not correctly con-
on screen nected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in CD/
DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child lock system is activated
No picture through The HDMI option has been
HDMI switched to "Off" in the Setup
menu.
No response when Power supply problem or static
pressing button charging of appliance
Solution
WARNING:
Before troubleshooting, switch the player off.
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
Switch the player on by the mains switch (Fig. 2/17).
WARNING:
Before troubleshooting, switch the player off.
Check the correct it of the Video cable
Video cable". Make sure that the jacks are tightly in the
sockets.
Insert a CD/DVD.
Use only compatible media (see
Turn the CD/DVD around.
Clean the CD/DVD around
Use a diferent CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child lock "Parental".
Connect the device to your TV set with a Scart cable and
change the option in the HDMI Setup menu to "On".
If you do not have a Scart cable, proceed as follows:
1. Open the CD/DVD tray in DVD mode.
2. Press the SETUP button.
3. Now press the following buttons in sequence:
2x Cursor button
6x Cursor button
1x PLAY/ENTER button.
1x Cursor button
1x Cursor button
1x PLAY/ENTER button.
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the player
on again.
ENGLISH
69
"Connecting the
"Technical Data").