Intended Use; Setting Up And Connecting; Unpacking; Setting Up The Loudspeakers - AEG MC 4448 DVD Bedienungsanleitung

Intended use

Defect

Unpacking

Setting up

Setting up the Loudspeakers

The DVD-Player is solely intended for the following tasks:
K
Playing of Video DVD/Video CD.
K
Playing of Audio-CD,
K
Reception of radio programmes.
K
Audio playback from external audio sources.
Any other use is considered non-intended use and is prohibited.
If the machine should become defective at some point:
K
If the power supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer services, in order to
avoid hazards.
K
Should fluid have seeped into the player or if the player has been
dropped down or damaged in any other way, the player must be
examined by an authorized dealer. Disconnect the player from the
power supply and consult an authorized dealer.

Setting up and connecting

Unpack the appliance and all accessories and check that the contents are
complete.
CAUTION:
Always transport/send the player in its original packaging to prevent it
from being damaged. Keep the packaging for this purpose. Dispose of
unnecessary packaging material in accordance with the regulations ap-
plicable in your country.
NOTE:
Sollten Sie einen Transportschaden bemerken, wenden Sie sich umge-
hend an Ihren Händler.
1. Place the device and the speakers on a stable, horizontal and level
surface. Keep a distance of at least 10 cm from walls and objects.
2. Connect the device to a properly installed power socket.
NOTE:
Do not insert the plug of the DVD player into the socket until all loud-
speakers and connections have been correctly made!
1. Plug the cinch connector from the speakers into the SPEAKERS R/L
jacks (Fig. 2/ 20).
ENGLISH
45