Specifications - Makita BUC250 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Lock-off button
2-2. Switch trigger
3-1. Front hand guard
3-2. Lock
3-3. Unlock
4-1. Adjusting screw
5-1. Slightly slide
5-2. Move in the upright position
6-1. Press in
6-2. Loosen
6-3. Sprocket cover
6-4. Adjusting dial
7-1. Sprocket
8-1. Adjusting pin
9-1. Small hole

SPECIFICATIONS

Saw chain
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
･
･
･
･
･
･
Downloaded from www.Manualslib.com
Explanation of general view
10-1. Press in
10-2. Tighten
10-3. Loosen
11-1. Lever
12-1. Press in
12-2. Loosen
13-1. Low
13-2. High
13-3. Adjusting dial
13-4. Guide bar
13-5. Saw chain
14-1. Press in
14-2. Tighten
16-1. Oil tank cap
16-2. Oil tank opening
16-3. Oil inspection window ( for refilling
16-4. Oil inspection window
Model
Chain speed per minute
Length of guide bar
Guide bar type
Type
Pitch
No. of drive links
Number of teeth
Overall length
Net weight
Rated voltage
Read instruction manual.
Wear eye protection.
Wear ear protection.
Wear a helmet, goggles and ear
protection.
Do not expose to rain.
Hold the saw with both hands while
working! One-handed use is extremely
hazardous!
Maximum permissible cut length
manuals search engine
the tank with oil)
Sprocket nose bar
91VG
3/8"
40
6
576 mm
･
END005-4
･
･
Cd
Ni-MH
Li-ion
5
18-1. Lower guide
26-1. Felling area
29-1. Felling direction
29-2. Danger zone
29-3. Escape route
30-1. Scabbard (chain cover)
30-2. Battery cartridge
34-1. Small dust or particles
34-2. Slotted bit screwdriver
36-1. Sprocket
36-2. Locking ring
37-1. Locking ring
37-2. Sprocket
38-1. Limit mark
39-1. Brush holder cap
39-2. Screwdriver
BUC250
8.3 m/s (500 m/min)
250 mm
Carving bar
25AP
1/4"
60
9
589 mm
4.5 kg
D.C.36V
Direction of chain travel
Saw chain oil adjustment
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.