System Settings Screen - JVC KY-F75 Bedienungsanleitung

4. Settings (continued)
System setting screen
Used to select the method for canceling the freeze image and decide whether or not a color bar
should be displayed as test pattern. It is also used for saving the set values of the setting screens
in the memory of the KY-F75.
[ ] indicates the factory setting
Item
Freeze cancel
Test pattern
Pattern level
When "BAR"
is selected.
E42
For selecting the method for canceling the
freeze image.
For selecting display of the color bar.
For selecting the color bar level.
Set Value
[MANUAL] Sets the method for canceling the FREEZE when the
AUTO1s monitor screen is in FREEZE condition .
AUTO3s MANUAL : Cancelled by trigger input.
AUTO5s AUTO1s
OFF AUTO3s
AUTO5s
OFF
* When set to "AUTO" or "OFF", the displayed screen can
be updated by trigger input during the FREEZE condition.
[OFF] Selects whether or not a color bar should be displayed as
BAR test pattern.
OFF : Color bar is not displayed. The normal video sig-
BAR : Color bar is displayed.
Selects the level of the color bar signal.
[255]
255 : Outputs a color bar signal in which the white level is 255.
213
213 : Outputs a color bar signal in which the white level is 213.
Contents
: Cancelled after 1 second.
: Cancelled after 3 seconds.
: Cancelled after 5 seconds.
: Not cancelled.
nal is shown.
Save button:
Click this button to save
the values set for the
setting screens in the
memory of the KY-F75.
However, when KY-LINK
is started up, it recalls
and sets the camera to
the values valid when it
was closed down the
previous time. Conse-
quently, the settings
saved in the camera with
the Save button are
made invalid.