Herunterladen Diese Seite drucken
Philips PDS-70mr 24V Installationsanweisungen
Philips PDS-70mr 24V Installationsanweisungen

Philips PDS-70mr 24V Installationsanweisungen

Dmx / ethernet / pre-programmed

Werbung

PDS-70mr 24V
DMX / Ethernet / Pre-programmed
A
Must be installed by a qualified electrician in
accordance with all national and local electrical and
construction codes and regulations.
Doit être installé par un électricien qualifié conformément aux codes et
réglementations électriques nationaux et locaux du bâtiment.
Muss von einem geprüften Elektriker in Übereinstimmung mit allen
nationalen und örtlichen elektrischen Codes und Regelungen installiert
werden.
A
Before installing this product, please visit the
product page at www.philipscolorkinetics.com for the
latest version of the installation instructions. Due to
continuous improvements and innovations, installation
instructions may change without notice.
Avant de procéder à l'installation de ce produit, veuillez consulter la
page Web du produit à l'adresse www.philipscolorkinetics.com pour
obtenir les instructions de montage les plus récentes. En raison des
améliorations et innovations sans cesse entreprises, les instructions de
montage peuvent être modifiées sans préavis.
Confirm all components received
Confirmez la réception de l'intégralité des composants
Bestätigen Sie, dass Sie alle Bestandteile erhalten haben
Compruebe si ha recibido todos los componentes
Confermare tutti i componenti ricevuti
Controleer alle ontvangen componenten
すべてのコンポーネントが揃っていることを確認します
确认收到了所有部件
PUB-000331-00 R00
La instalación debe realizarla un electricista calificado siguiendo todos
los códigos y normativas eléctricas y de construcción, tanto nacionales
como locales.
Devono essere installati da un elettricista qualificato in conformità con
le norme locali e nazionali vigenti in materia di costruzioni edilizie e
installazione di impianti elettrici.
Moet door een gekwalificeerd elektricien overeenkomstig alle nationale
en lokale elektrische verordeningen worden geïnstalleerd.
Besuchen Sie vor der Installation des Produkts bitte die
Produktseite unter www.philipscolorkinetics.com, um die aktuellen
Installationsanweisungen herunterzuladen. Aufgrund kontinuierlicher
Verbesserungen und Innovationen können die Installationsanweisungen
ohne Vorankündigung geändert werden.
Antes de instalar este producto, visite la página del producto en
www.philipscolorkinetics.com para consultar la última versión de
las instrucciones de instalación. Debido a las continuas mejoras e
innovaciones, las instrucciones de instalación pueden cambiar sin previo
aviso.
Prima di installare il prodotto, visitare la pagina relativa all'indirizzo
www.philipscolorkinetics.com per la versione più recente delle istruzioni
d'installazione. Grazie ai miglioramenti e alle innovazioni continue, le
istruzioni sono soggette a modifiche senza preavviso.
E www.colorkinetics.com/support
Installation Instructions
Instructions d'installation
Instrucciones de instalación
Installatie-instructies
インストール手順  安装指示
国または地域の建築コードおよび規制にすべて従い、
資格のある電気技師が設置してください。
必须根据所有国家和地方的电气和施工准则及规范,
由符合资格的电工进行安装。
Ga voordat u dit product installeert, eerst naar de productpagina op
www.philipscolorkinetics.com voor de meeste recente versie van
de installatie-instructies. Vanwege voortdurende verbeteringen en
innovaties kunnen de installatie-instructies zonder bericht gewijzigd
worden.
この製品を設置する前に、
www.philipscolorkinetics.com
品ページにアクセスして、 最新の設置手順を確認してく
ださい。 改善 ・ 改良を継続的に行っているため、 取り付
け手順が予告なく変更されることがあります。
安装该产品之前,请先访问产品页面
以获取最新版的安装说明。由于在
philipscolorkinetics.com
不断地改进和创新,安装说明可能会有所改动,恕不
另行通知。
Installationsanweisungen
Istruzioni per l'installazione
の製
www.

Werbung

loading

Inhaltszusammenfassung für Philips PDS-70mr 24V

  • Seite 1 PDS-70mr 24V Installation Instructions Instructions d’installation Installationsanweisungen DMX / Ethernet / Pre-programmed Instrucciones de instalación Istruzioni per l’installazione Installatie-instructies インストール手順  安装指示 La instalación debe realizarla un electricista calificado siguiendo todos 国または地域の建築コードおよび規制にすべて従い、 Must be installed by a qualified electrician in los códigos y normativas eléctricas y de construcción, tanto nacionales 資格のある電気技師が設置してください。...
  • Seite 2 Informationen zum Einbau, einschließlich elektrischer Verkabelung und Datenleitungskonfiguration, entnehmen Sie dem Benutzerhandbuch für den PDS-70mr 24V. Consulte la Guía del producto de PDS-70mr 24V para obtener más información sobre la planificación de la instalación, incluidas las pautas sobre configuración de datos y electricidad.
  • Seite 3: Remove Cover

    PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Tighten cable connectors to manufacturer’s specification and seal all unused openings Branchez les raccords de câble et bouchez les orifices non utilisés 5/16 in Hex Schließen Sie alle Kabel an, und dichten Sie alle nicht verwendeten Öffnungen ab.
  • Seite 4 PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Data connections – DMX iPlayer 3 Controller Connect data – DMX PDS-70mr 24V Controller iColor MR gen3 Brancher Données – DMX Verbinden Daten – DMX Conecte Datos – DMX 328 ft (100 m) Maximum Effettuare il collegamento Dati –...
  • Seite 5 PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Data connections – Ethernet Light System Manager Controller Connect data – Ethernet Brancher Données – Ethernet Verbinden Daten – Ethernet Ethernet iColor MR gen3 Switch Conecte Datos – Ethernet Effettuare il collegamento Dati – Ethernet Verbinden Data –...
  • Seite 6 Controller PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions 328 ft (100 m) Maximum Data connections – Pre-programmed Connect data – Pre-programmed iColor MR gen3 Brancher Données – Pre-programmed Controller PDS-70mr 24V Verbinden Daten – Pre-programmed PDS-70mr 24V Pre-programmed Conecte Datos –...
  • Seite 7 CE / PSE UL / cUL CE / PSE CE / CQC Line Voltage Tension de secteur Netzspannung PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Tensión de línea Tensione di linea Netspanning Neutral CE / CCC CE / Japan...
  • Seite 8 PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Connect fixture cable Branchez le câble de l’appareil Schließen Sie das Vorrichtungskabel an Conecte el cable de la lámpara. Collegare il cavo del gruppo di illuminazione Sluit de armatuurkabel aan フィクスチャのケーブルを接続します。...
  • Seite 9 PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Light show programming – Pre-programmed Turn the power ON Rétablissez le courant Schalten Sie die Stromzufuhr EIN Encienda la alimentación eléctrica Attivare l’alimentazione Schakel de voeding in 電源を ON にします  打开电源 Light show programming – Pre-programmed Options de programmation du jeu de lumière préprogrammé...
  • Seite 10 PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Set light show options Définissez les options du jeu de lumière Siehe Lichtshow-Optionen Configure las opciones de las demostraciones con luz Impostare le opzioni dell’allestimento luci Stel de lichtshowopties in ライトショーのオプションの設定...
  • Seite 11: Turn The Power On

    PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Secure connections and covers Fixez les branchements et les couvercles Sichern Sie die Anschlüsse und Abdeckungen Apriete las conexiones y cubiertas Connessioni e coperchi protetti Controleer verbindingen en afdekking 接続とカバーを固定します。 安全连接和护盖...
  • Seite 12: Maintenance

    PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Maintenance Maintenance Wartung Mantenimiento Manutenzione Onderhoud メンテナンス 维护 Make sure power is OFF Assurez-vous que l’alimentation est coupée Vergewissern Sie sich, dass die Stromzufuhr ABGESCHALTET ist Asegúrese de que la alimentación eléctrica esté desconectada Assicurarsi che l’alimentazione sia disattivata...
  • Seite 13 PDS-70mr 24V DMX / Ethernet / Pre-programmed Installation Instructions Item Output Housing Color Item Number Philips 12NC PDS-70mr 24V DMX 24 VDC Grey 109-000018-01 910503700099 PDS-70mr 24V Ethernet 24 VDC Grey 109-000018-02 910503700583 PDS-70mr 24V Pre-programmed 24 VDC Grey 109-000018-00...
  • Seite 14 Do not attempt to install or use a fixture until you It is the end user’s responsibility to use the Do not hot swap fixtures. Ensure that power to read and understand the installation instructions and included conductors to permanently connect the the series is off before connecting or disconnecting safety labels.
  • Seite 16 EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore are either Tel 888.385.5742 registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in the United Tel 617.423.9999 States and / or other countries. All other brand or product names are trademarks or registered Fax 617.423.9998...