Installing The Tools - Parkside PKIK 4.3 A1 Bedienungs- Und Sicherheitshinweise

PARKSIDE PKIK 4.3 A1

6.5.10 Installing the tools

The following tools/holders are supplied with the device:
Magnet [C]
Mirror [E]
Note: For the magnet [C], the tool holder must be pushed onto the attachment
beforehand because of its size.
76 - English
Place the small barbed hook of the tools in the
opening at the end of the goose neck, just
below the camera head [10].
Carefully slide the tool holder [G] completely
over the camera head [10]. Make sure that the
attachment is in the insertion recess of the tool
holder.
Hook [D]
Tool holder [G]