Zoomed In Image Viewing - Sony YS-DX316P Bedienungsanleitung

Camera Screen Display Control : Monitor 1
Split Screen Viewing
By pressing the MULTI button, you can select one of
the 8 split screen combinations. The camera indicators
corresponding to the cameras displayed on-screen
come on.
Notes
• The unit will remember the selected screen display
and, when turned on again, will automatically go
back to the screen display combination selected
before it was turned off.
• If a camera is not connected to certain Camera IN
terminals, "NO VIDEO" will be displayed for the
corresponding screen(s)
×2 Zoomed in Image Viewing
Example: To watch the image from camera 14 at x2
zoom.
Press the ZOOM button, then press the INPUT
SELECT (14) button.
The image will zoom in, the zoomed image will be
displayed full screen, and "Z" will flash instead of the
camera number (14). (The ZOOM indicator and the
camera (14) indicator will flash.) Press the INPUT
SELECT (14) button again, the zoomed split screen is
displayed. Pressing the INPUT SELECT (14) again
returns to the nomal split screen display. Press the
ZOOM button to cancel all ZOOMs.
20
(EN)
To adjust the zoomed in image position
Using the following buttons, adjust the
zoomed in image position.
• SHIFT v: To lower the image.
• SHIFT b: To move the image towards the right.
Notes
• The zoomed in image position is memorized and it
will return to that position the next time the zoom
function is used.
• The zoom in image position set function can be used
from split or full screen display.