Display Set Menu / Monitor Out Set Menu - Sony YS-DX316P Bedienungsanleitung

DISPLAY SET Menu / MONITOR OUT SET Menu

Setting
1
Press the MENU button, then press the SHIFT v
button to select "4. DISPLAY SET" and press the
MENU button again.
2
Press the DATA + (or –) button to select "ON" for
"LIVE CLOCK", then press the SELECT button.
3
Press the SHIFT v button to set the clock display
position as desired (6 positions), then press the
SELECT button.
Press the SHIFT v button to select "LIVE TITLE",
then press the DATA + (or –) button to select
"ON" or "OFF". See "Display Settings" below,
then following the same procedure, set "VCR PB
CLOCK", "VCR PB TITLE", "MON.1
INTERVAL", "MON.2 INTERVAL", or
"MONITOR2 ← MONITOR1".
Note
Even though the VCR PB CLOCK has been turned
on, you can change the clock display position.
4
Press the MENU button, then press the SHIFT v
button to select "7. EXIT" and press the MENU
button again.
Display Settings
LIVE CLOCK
ON: The clock is displayed when camera signals are
displayed. (To set the clock, see "CLOCK SET
Menu")
OFF: The clock is not displayed when the camera
signals are displayed.
LIVE TITLE
ON: The title is displayed when camera signals are
displayed. (To set a title, see "TITLE SET
Menu".)
OFF: The title is not displayed when camera signals
are displayed.
VCR PB CLOCK
ON: The clock is displayed when the signals from the
VCR playback are displayed.
OFF: The clock is not displayed when the signals
from the VCR playback are displayed.
VCR PB TITLE
ON: The title is displayed when the signals from the
VCR playback are displayed.
OFF: The title is not displayed when the signals from
the VCR playback are displayed.
MON.1 INTERVAL
0.5 to 30SEC (in 0.5 sec increments): The timing of
the sequential display on monitor 1.
MON.2 INTERVAL
0.5 to 30SEC (in 0.5 sec increments): The timing of
the sequential display on monitor 2.
MONITOR2 ← MONITOR1
To have the same display on monitor 2 as the one on
monitor 1.
15
(EN)