Bosch FPP-5000 Bedienungsanleitung Seite 20

en | Terminal Assignment and LED Displays
20
2 Terminal Assignment and LED Displays
See Graphics, page 4.
Labeling
+U/0V
a1-/b1+
SHIELD
a2-/b2+
Labeling
STATUS
BCM 24V
12/2012 | 5.0 | F.01U.164.562
Connection
1x auxiliary power supply incoming (support for looping through)
1x auxiliary power supply outgoing (support for looping through)
LSN incoming
Shield wire
LSN outgoing
LED on
In operation
– Creeping
short
detected
1
– Over current
=> POWER
OUT 1
switched off
LED off Labeling
Idle
GROUND
FAULT
No faults
BCM 24V
2
Installation Guide
LSN Communication Interface
LED on LED off
Ground fault No ground
detected fault
– Creeping No faults
short
detected
– Over current
=> POWER
OUT 2
switched off
Bosch Sicherheitssysteme GmbH
FPP-5000