Inhaltsverzeichnis
Werbung
Assembly Instructions
Fig. A
Assembly Instructions
Please follow the sketches to set up the stand. Depending on the angle
grinder, you require up to 7 open end spanners (8 mm, 2 x 10 mm, 2 x 14 mm
and possibly 2 x 17 mm), two Allen wrenches (5 mm and 6 mm) and a slot
screwdriver (approx. 5 mm).
Mount the saddle (2) with the Allen screws (4) and the washers (3) on the
base plate (1).
Mount the handle (10) with the embedded screw and the corresponding nut on
the retainer (6). Place a washer (21) between nut and retainer.
Attach the angle grinder to the retainer (6). Please notice that the angle grinder
10
Werbung
Inhaltsverzeichnis
