Milling with a compass
♦
To do this, slide the rip fence
180° (see fig . G) into the guide rails
the base plate
according to the required
dimension .
♦
Tighten the locking screws
♦
Set the centring point
and tighten it using the wing screw (see fig . G) .
Counter the centring point
the oblong hole of the open-ended spanner
♦
Stab the centring point
tre point of a circle .
♦
Check the setting by means of a practical test .
Maintenance and cleaning
WARNING! RISK OF INJURY!
■
Switch the appliance off and remove the
power plug before starting any work on
the appliance.
■
The appliance must always be kept clean, dry
and free from oil or grease .
■
Use a soft, dry cloth to clean the housing .
WARNING!
■
Have the power tool repaired by the service
centre or a qualified electrician and only
using genuine replacement parts. This will
ensure that the safety of the appliance is
maintained .
WARNING!
■
If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
NOTE
►
Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service centre .
■
10
│
GB │ IE │ NI │ CY
turned by
on
.
into the rip fence
to tighten it using
.
into the marked cen-
Disposal
The packaging is made from environmen-
tally friendly material and can be dispo-
sed of at your local recycling plant .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Please consult your local authorities regarding
suitable disposal of worn out power tools .
Dispose of the packaging in an envi-
ronmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
POF 1200 D3