Sony DSKB-1820 Installationsanleitung Seite 33

Connector panel (SDI Input)
Connector panel (HD SDI)
2
Remove the outer BNC connector and the harness from the HD
SDI connector panel.
Harness
3
Replace the HD SDI connector panel (see following figure 1), and
connect the harness removed in step 2 to the temporary joint
connector on the SDI-93 board (see following figure 2).
Connector panel (AES/EBU Input)
SDI-93 board
1
2
Connector panel
(HD SDI)
Outer BNC connector
Installation 33