Bosch CRS 845H Einbauanleitung Seite 42

en 42 | CRS 845H | Installation
4.6.5 Supply hoses
!
Make sure that the supply hoses are correctly engaged.
¶
Plug the six hydraulic Supply hoses (Fig. 35, item 1)
from the heat exchanger into the distributor's hose
couplings (sequence is optional).
Fig. 35: Supply hose connection
|
1 689 978 535 2014-10-21
1
4.7 Fit type label
¶
Fit rating plate below the rating plate on the
EPS switch cabinet.
1 687 001 845
Best. -Nr
.
Typ CRS845
.
Serien-Nr.
.
Best.-Nr.
XXX Geräte-Nr.
FD
Nennspannung [V]
Phasenzahl
Frequenz [Hz]
Pmax = 160 MPa
Nennleistung [kW]
Nennstrom [A]
Strom d.gr. [A]
Made in Germany Bemessungsstrom [A]
Made in Germany
Fig. 36: Location for affixing the type label
Typ
FD
Steuerspannung [V]
Sicherung [A]
Druckluft [bar]
Wasser [bar] [L/h]
Schutzart [IP]
Gewicht [kg]
Stromlaufplan
458777-73
Robert Bosch GmbH