Rack-Mount Angles; Mounting Screws; Rack Mounting - Panasonic AW-RC600E Bedienungsanleitung

Rack mounting

When the unit is to be mounted on a EIA 19-inch rack, use rack mount angles (provided) and four mounting screws (M410)
(provided).
1. Turn off the power switch of the unit.
2. Remove four screws fixing the rubber feet and remove the four rubber feet from the bottom of the unit.
3. Fix the rack angle handle by using four rack angle handle fixing screws.
4. Attach the rack mount angles on both sides and fix them by using four mounting screws provided with the rack
mount angle.
Rack mount angle

Mounting screws

(provided)
5. Install the unit on the EIA 19-inch rack by using four screws (locally purchased).
Cautions:
 Do not use the unit on the place affected by the vibration.
 When the fan is used to keep the temperature in the rack within +50°C, it should be put apart from the monitor.
Remove rubber feet.
Rack mount angle fixing screws
(provided)
Rack angle handle
Fix four screws (not provided).
18 (E)
Rack mount angle
fixing screws
(provided)
Mounting screws
(provided)