AIR PUNCH AND FLANGE
TOOL PDLA 6.3 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for punching and panel
flanging. Any other usage or modification of the
appliance is deemed to be improper and carries
a significant risk of accidents. The manufacturer
accepts no responsibility for damage(s) resulting
from improper usage. This appliance is intended
for domestic use only.
Symbols on the compressed air tool:
WARNING!
│
GB │ IE
■
14
Read the operating
instructions before use.
Wear a dust mask.
Always wear eye pro-
tection when using or
servicing the appliance.
Always wear ear muffs.
Oil regularly
Features
(For illustrations see fold-out pages)
Flange tool
Punch
Trigger
Connecting nipple
Oil container
Package contents
1 air punch and flange tool
1 connecting nipple (pre-fitted)
1 oil container
1 set of operating instructions
Technical data
Working pressure:
Air consumption:
Max. sheet thickness: 1.5 mm (not hardened)
Hole diameter:
Depth max:
Compressed-air supply: 1/4"
Weight:
max. 6.3 bar
160 l/min (average)
approx. 5 mm
12 mm
ca. 1.25 kg
PDLA 6.3 A1