Intended Use; Before First Use; Installing The Saw Blade Resp. The Scraper - Westfalia 81 25 09 Bedienungsanleitung

Intended Use

The multi-function tool may only be used for dry sanding work. With
appropriate saw blades and scrapers, the multi-function tool can also be used
for working on wood, metal, plaster, plastic and filler surfaces. The sanding
paper pads can also be used for removing rust, old paint and intermediate
sanding. The included straight saw blade (8) is suitable for cutting wood and
plastics.
This tool is not intended for commercial continuous operation.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

Remove the multi-function tool and all accessories out of the packaging and
check all parts for damage in transit. Keep packaging materials out of reach of
children. There is risk of suffocation!
Before undertaking any work on the multi-function tool, pull out
the power plug!

Installing the Saw Blade resp. the Scraper

1. Attach the tool (saw blade or scraper)
to the tool holder. The tool can be
attached in any desired position, e.g.
in line with the housing or on the right
or left side of the housing.
2. Attach the tool with the large flange
(11) and the tool socket screw (12).
Make sure to place the flange with the
convex side upwards (see figure 1).
3. If you do not install the dust extracting adaptor (5) when working, make sure to
insert the rubber plug (14) into the open thread (see arrow marking). This
prevents the thread from soiling.
Operation
11
1