Specifications; Safety Instructions - Makita 4112HS Betriebsanleitung

ENGLISH
1 Wing bolt
2 Base
3 Cutting depth
4 Clamping nut
5 Wheel guard
6 Switch trigger
7 Lock lever
8 Shaft lock
9 Socket wrench

SPECIFICATIONS

Model
Wheel diameter
Max cutting capcity
–1
No load speed (min )
Overall length
Net weight
Safety class
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for cutting tracks in concrete walls or
cutting in ferrous materials or concrete drainage chan-
nels with a diamond wheel but without using water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
4
Explanation of general view
10 Flange
11 Ring
12 Wheel
13 Flange
14 Hex bolt
15 Dust nozzle
16 Elbow joint
17 Hose
18 Notch

SAFETY INSTRUCTIONS

4112HS Warning! When using electric tools, basic safety pre-
cautions should always be followed to reduce the
305 mm
risk of fire, electric shock and personal injury, includ-
ing the following. Read all these instructions before
100 mm
attempting to operate this product and save these
5,000
instructions.
For safe operation:
648 mm
1.
10.3 kg
2.
/II
3.
4.
5.
6.
7.
8.
9.
10. Connect dust extraction equipment
11. Don't abuse cord
19 Cutting line
20 Commutator
21 Insulating tip
22 Carbon brush
23 Dust cover
24 Screwdriver
25 Brush holder cap
Keep work area clean
Cluttered areas and benches invite injuries.
Consider work area environment
Don't expose power tools to rain. Don't use power
tools in damp or wet locations. Keep work area well
lit. Don't use power tools in presence of flammable
liquids or gases.
Guard against electric shock
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges, refrigerators).
Keep children away
Do not let visitors contact tool or extension cord. All
visitors should be kept away from work area.
Store idle tools
When not in use, tools should be stored in dry, high,
or locked-up place, out of the reach of children.
Don't force tool
It will do the job better and safer at the rate for which
it was intended.
Use right tool
Don't force small tools or attachments to do the job
of a heavy duty tool. Don't use tools for purposes not
intended; for example, don't use circular saw for cut-
ting tree limbs or logs.
Dress properly
Do not wear loose clothing or jewelry. They can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
Use safety glasses and hearing protection
Also use face or dust mask if cutting operation is
dusty.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Never carry tool by cord or yank it to disconnect it
from receptacle. Keep cord from heat, oil and sharp
edges.