Cleaning With Inserts - Silvercrest SUR 46 A1 Bedienungs- Und Sicherheitshinweise

If the cleaning process is started several the liquid becomes very
warm (approx. 30 °C after the first cleaning process and approx.
45 °C after the third in spite of a five-minute cooling down phase).
However, it is recommended that between the cleaning processes
a pause of at least five minutes is inserted in order to allow the
device to cool down. Do not change the time interval while a
cleaning process is still running. Allow the time interval to expire
normally, thus ensuring that the cleaning process is properly
time-controlled.
6. If you wish to repeat the cleaning process, press the timer button
The next timing program appears on the display
7. Set the desired time interval from the five time interval settings
available using the timer button
8. Press the On-switch
9. After the cleaning process has ended, remove the mains plug
from the socket, open the cover
out of the device.
Note: In order to avoid lime residues, always empty the stainless
steel tank
7
We recommend that the liquid should be renewed after every
cleaning process if possible.
10. Please store the device in a cool and dry place.

Cleaning with Inserts

Note: The basket insert
and therefore reduces the cleaning performance. It may therefore be
necessary to carry out several cleaning processes.
and start the cleaning process.
1
and wipe dry with a fabric or microfibre cloth.
absorbs one third of the ultrasonic waves
9
.
4
and take the cleaned object
5
Operation
.
4
.
2
12
GB/IE 17