To Connect The Product To A Phone Line - HP LaserJet 3330mfp Faxhandbuch

Note
1
2
3
6 Chapter 1 Setting up
If you do not have an RJ11 phone jack or if an RJ11 adapter did not come
with the product, you must buy and install one to convert the phone jack
to an RJ11 phone jack.
To connect the product to a
phone line
Use these steps to connect the product to a
phone line, even if you have two telephone
numbers on that line and use a ring pattern
service (such as distinctive ring).
1 If a phone cord is plugged into the phone
jack, unplug the cord and set it aside.
2 Open the print cartridge door and swing
open the left side panel to reveal the
phone line sockets.
3 Take the phone cord included with the
product and plug one end of it into the
product's line socket (the socket on top).
Note
You must use the phone cord that came with
the product in order for the product to
function correctly.
ENXC