Icons; Display Icons; Icons In The Editing Mode - Endress+Hauser RIA46 Bedienungsanleitung

Operation
6.3

Icons

6.3.1

Display icons

Device is locked/operating lock; the device setup is locked against changes to parameters, the display can
be modified.
A0010425
1 Channel one (Analog in 1)
2 Channel two (Analog in 2)
1M First calculated value (Calc value 1)
2M Second calculated value (Calc value 2)
Max Maximum value/value of the maximum indicator of the channel displayed
Min Minimum value/value of the minimum indicator of the channel displayed
In the event of an error:
The display shows:
Underrange/overrange:
In the dot matrix section, the error and channel name (TAG) are specified.
6.3.2

Icons in the editing mode

The following characters can be used to enter user-defined text:
'0-9', 'a-z', 'A-Z', '+', '-', '*', '/', '\', '%', '°', '2', '3', 'm', '.', ',', ';', ':', '!', '?', '_', '#', '$', '"', '´', '(', ')',
'~'
For numerical entries, the numbers '0-9' and the decimal point are available.
Furthermore, the following icons are used in the editing mode:
Symbol for the setup
A0010426
Symbol for the Expert setup
A0010428
Symbol for diagnostics
A0010429
Accept entry.
If this icon is selected, the information entered is accepted at the position and the user exits the editing
mode.
A0010423
Reject entry.
If this icon is selected, the information entered is rejected and the user exits the editing mode. The text
configured beforehand remains unchanged.
A0010424
42
, the measured value is not displayed
RIA46
Endress+Hauser