Display And Device Status Indicator/Led - Endress+Hauser RIA46 Bedienungsanleitung

RIA46
6.2

Display and device status indicator/LED

The device provides an illuminated LC display which is split into two sections. The segment
section displays the value of the channel and additional information and alarms.
In the dot matrix section, additional channel information, such as the TAG, unit or bar graph,
is displayed in the display mode. Operating text in English is displayed here during operation.
The parameters for configuring the display are explained in detail in Section "Configuring the
device" in the Operating Instructions.
 14 Display of the device
1 Channel display: 1: analog input 1; 2: analog input 2; 1M: calculated value 1; 2M: calculated value 2
2 Dot matrix display for TAG, bar graph and unit
3 Limit value indicators in the bar graph
4 "Operation locked" indicator
5 Green LED; on - supply voltage applied
6 Red LED; on - error/alarm
7 Yellow LED; on - relay 1 energized
8 Yellow LED; on - relay 2 energized
9 Minimum/maximum value indicator
In the event of an error, the device switches automatically between displaying the error and
displaying the channel, see Section "Device self-diagnosis, ..." and Chapter "Troubleshooting" in
the Operating Instructions.
Endress+Hauser
1
2
3
Operation
4
5
6
7
8
9
A0010690
41