Operating Matrix; Quick Commissioning/Make It Run - Endress+Hauser EngyCal RH33 Handbuch

Operation
5.3

Operating matrix

For a complete overview of the operating matrix including all configurable parameters, refer to
the Appendix of the Operating Instructions on CD-ROM.
Language
Display/operation menu
Setup menu
Diagnostics menu
Expert menu
5.4

Quick commissioning/make it run

For quick commissioning of the "standard" BTU meter application, you only have to enter 4
operating parameters in the menu Setup.
30
Drop-down list with all available operating languages. Select the language of the
device.
• Select the group for display (automatic change or fixed display group)
• Setting for the display brightness and contrast
• Display the stored analyses (Day, Month, Year, Billing date, Totalizer)
In this Setup, you can configure the parameters for quick commissioning of the
device. Advanced setup includes all important parameters for configuring the
instrument function.
• Units
• Pulse Value
• Flow sensor mounting location
• Date and time
• Advanced setup (settings that are not essential for basic operation of the device)
Special settings can be configured via "Expert".
Device information and service functions for a swift device check.
• Diagnostic messages and list
• Event and custody transfer logbook
• Device information
• Simulation
• Measured values, outputs
The Expert menu offers access to all operating options of the device, including fine
tuning and service functions.
• Jump directly to parameters via Direct Access (only on the device)
• Service code for displaying service parameters (via PC operating software only)
• System (settings)
• Inputs
• Outputs
• Application
• Diagnostics
EngyCal® RH33
Parameters for
quick commissioning
Endress+Hauser