Troubleshooting Guide; Energy Saving Tips - Klarstein 10005399 Bedienungsanleitung

PROBLEM
Refrigerator does not
operate.
Refrigerator is not cold
enough.
The light does not work.
Vibrations.
The door will not close
properly.
• The refrigerator should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
• Overloading the refrigerator forces the thermoelectric cooling system to run longer.
• Reduce door openings and extended searches, remove as many item as needed at one time, and
close the door as soon as possible.
• One characteristic of heat-pipe units is the length of time it requires to recover from having the
door opened and shut frequently. It may be necessary to wait longer for the temperature to return
to its former level once the door has been opened for too long. This is normal for the type of unit.
• Heat-pipe technology costs just pennies to operate. It is environmentally friendly due to the lack
of CFC's.
11
Trouble Shooting Guide
POSSIBLE CAUSE
Not plugged in.
The circuit breaker tripped or a blown fuse.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly. The door gasket does not seal
properly.
The refrigerator does not have the correct clearances. Abnormal voltage.
Not plugged in.
The circuit breaker tripped or a blown fuse. The LED light has burned out.
Check to assure that the refrigerator is level.
The refrigerator is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves, bins, or baskets are out of position.

Energy Saving Tips